SensorsThink Board

ADIUVO ENGINEERING BLOG

MicroZed Chronicles: PetaLinux Distro Boot

With the release of the 2020.x tool chains, PetaLinux was updated to support Distro Boot. If you are not familiar with Distro Boot, its...

MicroZed Chronicles: Custom Board Design? What if something doesn’t work?

A couple of weeks ago I was working to bring up the sensors connected to the I2C and SPI interfaces on the custom SensorsThink Smart...

MicroZed Chronicles: PetaLinux I2C in the PS and AXI IIC

The sensors on the smart sensor IoT development board are connected to the programmable logic element of the Zynq-7020 device that is...

MicroZed Chronicles: Smart Sensor IOT Board Getting USB Up and Running

The smart sensor IOT board we developed contains several interfaces that really require the use of an operating system to get them up and...

SensorsThink Smart Sensor IoT Board Schematic

If you have been following along my latest blog posts on Configuring Zynq and Validating Memory for a Custom Board or Embedded Hour...

MicroZed Chronicles: Validating Your Custom Zynq Board Memory

In this blog, we will explore how to validate a custom Vivado configuration on a Zynq board.

MicroZed Chronicles: Configuring Zynq on a Custom Board

You may have seen my previous posts referencing a book I’ve been writing over the last two years with Dan Binnun and Saket Srivastava on...